Battery Energy Storage System (BESS)
Hold and drag the object to look aroundDrag left or right to look aroundand scroll down to continue
/EMS- System Normal
- No Alarms
- Link Connected
It reads the live and past load of the site. It watches the power the site draws and meets part of the need from the battery near the limit.
It stores the surplus by the generation and consumption forecast and raises self consumption. The stored energy is used at the hour it is needed.
It weighs wind output together with the weather forecast. Surplus is stored and used at the hour it is needed.
It follows hourly prices and tariff periods. It stores energy while electricity is cheap and uses it when the price rises.
It reads charge, temperature and health from the BMS. Charge, temperature and cycle limits are part of every decision.
It carries out frequency and voltage support commands by the signals from the grid.
/PCS- Bidirectional Mode
- No Alarms
- EMS Connected
The battery works with direct current. The busbars and the protection cabinet carry it to the power conversion system.
The grid works with alternating current. The power conversion system connects to the grid through the transformer.
As the battery fills it turns alternating current into direct current; as the battery gives energy it turns direct current into alternating current.
The bidirectional power conversion system makes the conversion between direct and alternating current in both directions.
The EMS decides when the battery runs and at what power, and the power conversion system carries it out.
Current, voltage and temperature are watched during conversion and the system runs within safe limits.
Fleet
Connected sites are monitored and managed from one centre.
Site
Containers and transformers are built as one facility.
EMS
It weighs the BMS information together with consumption, generation and tariff data and decides when the battery runs and at what power.
PCS
The battery works with direct current, the grid with alternating current. The bidirectional power conversion system makes this conversion in both directions.
System (BESS)
Batteries, power conversion and management systems come together in one containerised system.
Cooling
The liquid goes from the cooling unit to the racks through the lower line, passes from module to module and returns to the unit through the upper line.
Fire Safety
The detection line notices a fire early, the extinguishing circuit starts and sprays dry chemical powder from above to put the fire out.
DC Side
The busbars and the protection cabinet carry the direct current of the batteries safely.
BMS
It watches the battery itself and reports charge, temperature and health.
Rack
Battery modules come together in racks and work as one.
Module
Cells are joined in the module. The BMS watches charge, temperature and health.
Cell
The smallest unit that stores the energy: a prismatic lithium battery cell.

